Standard features of all SHEVS control centres:

• 24V- output for actuators (direction of motion is changed by reversing polarity)

• Signal line for automatic fire detectors

• Signal line for fire alarm button (non-automatic fire detectors)

• Emergency power supply for at least 72 hours, automatically recharged

• Monitoring of signal lines for wire breakage and short-circuit

• Monitoring of accumulator, mains and fuse failure

• Monitoring the bus line of actuators for wire breakage

• Internal indication of status Operation / Alarm / Malfunction

• Fire alarm button with indication status Operation / Alarm / Malfunction and Reset button connectable

• Possibility of connecting a Fire Alarm Control Panel (BMZ) for triggering of alarm

• Possibility of connecting a Wind and Rain Control System (WRS)

• Reverse-connect and deep-discharging protection of the accumulators

• Cycle repetition for reliable opening in the case of SHE action

• Selectable function: closes automatically when alarm has been reset (auto closing)

• Selectable function: malfunction of a signal line will trigger alarm (Malfunction = Alarm)

• Adjustable maximum ventilation position (stroke limitation) 

• Manual ventilation in “Start-Stop” mode (buttons are pressed briefly only, need not to be held) or in “dead man’s mode” (longer buttonpress, after releasing the actuators stop)

• Accumulators with VdS approval