Pneumatically operated mounting for installation in domelights etc.

• Opening angle 140°or 165°.For special opening angles, please inquire

• Opening mounting is factory adjustable to suit any domelight or continuous roof light (from approx. 780mm to 2.500mm inner width of curb or frame / continuous roof light opening)

• Due to cross beam design, only small forces are introduced into the curb and domelight frame

• Space-saving due to flat design

• Ease of assembly by hanging the mounting from above into the curb or frame

• Preassembled and adapted to specific building conditions.

• Available in six sizes with different pneumatic cylinders Type P (for selection of size, see drawing/table on page 2)

• As cylinder locks automatically in open position, unintentional closing is not possible

• Available in the versions “OPEN-CLOSE” and “OPEN only” (“OPEN only”: SHEU has to be unlatched and closed by hand)

• Domelight locked in closed position by mechanical hook locking device MHV and adjustable locking bolt EVB 3-M12 or extension set for ventilation Set-L3 (accessories, see next page)

• Upper cross beams including preassembled hook locking device MHV (see upper cross beams)

• Standard connection for 6mm pipe

• Can be provided with additional electric or pneumatic ventilation function

• When ordering, please complete the dimensional sheet, specifying inner width and hinge dimensions

Accessories:
 

• Accessories for mountings without ventilation function:
  • Upper cross beams: Upper cross beams including preassembled hook locking device MHV (see upper cross beams).
  • EVB 3-M12: Adjustable locking bolt

• Accessories for equipping mountings with ventilation function:
  • Upper cross beams: Upper cross beams including preassembled hook locking device MHV (see upper cross beams).

• Electrically operated ventilation with rack actuator
  • Set-L3-M8 / ST 12-1/8: Screw M8 with cross pin dia.12mm, including 2 fixing plugs ST 12-1/8“ for actuators Type E
  • Rack actuator Typ E: 500 / 250N (push / pull force), (see Electric Parts Catalogue -> actuators)
    E-300-230: 300mm stroke, 230V~ / 0,1A
    E-500-230: 500mm stroke, 230V~ / 0,1A

• Pneumatically operated ventilation with cylinder Type PODV:
  • Set-L3-M8: Screw M8 with cross pin dia.12mm Cylinder with 32 or 40mm piston rod diameter, including swivel screw fitting (see cylinder),
    PODV 32/12-300-12/6L: 300mm stroke
    PODV 32/12-500-12/6L: 500mm stroke 
    PODV 40/12-300-12/6: 300mm stroke
    PODV 40/12-500-12/6: 500mm stroke

  
For special types please inquire