24V- electrically operated spindle actuator, in anodized aluminium enclosure. Anodized aluminium or steel push rod

• Rated current: 1,6A; 2,0A respectively 2,6A

• Internal interference suppression according to EN5501

• Ambient temperature range -25 to +60°C, to EN 12101-2 annex G for 30 min. up to +300°C

• Disconnection in both end positions through internal limit switches

• Electronic “emergency stop switch-off” on overload

• Protection against operation with low voltage

• Dimensions: see data sheet

• Unit can be electronic parallel disconnected with S (see actuator controls) possible (NOTE: but no synchronous operation)

• Possible synchronisation with SYN (see actuator controls)

• Protection motor/electronic to DIN EN 60529: IP54

• Light grey silicone supply cable with connector brought out at side at lower end, length approx. 2,5m, other length on request. Temperature range -50 to +180°C (to DIN VDE 0282)

• Continuous adjustability in mounting ensured by sliding blocks and bearing pins LB12-SL13-M5x16 (included)

• Including eyebolt M10 Ø8mm

Types:

Standard stroke: 100 - 1200mm
For special stroke, please inquire.

Options: (see Data sheet)

• Other cable length: upon request

• Eyebolt: M10 Ø 6mm or Ø 10mm

• Clevis: Also available as clevis GK6x12, GK6x24, GK8x16, GK8x32, GK10x20 or GK10x40 instead of eyebolt

• E: Additional switches integrated for indication of both end positions (potentialfree NC contacts, 24V- / 1A)

• RAL: Actuator enclosure painted in a RAL colour

• UM8: Mounting at lower end with thread M8x16

• U10,2: Mounting at lower end with bore hole Ø 10,2mm

• U1/8”: Mounting at lower end with thread 1/8”

• IP65: Protection motor/electronic: IP65

Please inquire for more special versions of SG16 , SG20 , SG26 actuators