• 24V- electrically operated spindle actuator, in anodized aluminium enclosure. Anodized aluminium push rod

• Rated current: 0,8A; 1,0A respectively 1,3A

• Ambient temperature range -25 to +60°C, to EN 12101-2 annex G for 2h up to +110°C

• Disconnection at either end position by integrated limit switches

• Electronic “emergency stop” on overload

• Electronic parallel shutdown or synchronization via SYN possible

• Dimensions: see data sheet

• Protection to DIN EN 60529: IP40 (for use in dry rooms)

• Light grey silicone supply cable brought out at upper end, length approx. 2,5m, temperature range -50 to +180°C (to DIN VDE 0282)

• Continuous adjustability in mounting ensured by sliding blocks and bearing pins LB12-SL13-M5x16 (included)

• Including eyebolt M8 Ø8mm

Types

Standard stroke: 350, 550 or 750mm. For special stroke, please inquire.

Options (see Data sheet)

• Other cable length: upon request

• Eyebolt: M8 Ø 6mm or Ø 10mm

• Clevis: Also available as clevis GK8x16, GK8x32, GK10x20 or GK10x40 instead of eyebolt.

• E: Additional switches integrated for indication of both end positions (potentialfree NC contacts, 24V- / 1A).

• RAL: Actuator enclosure painted in a RAL colour

• U6: Mounting at lower end with bore hole Ø 6,1mm.

• UM8: Mounting at lower end with thread M8, 11mm deep.

• U10: Mounting at lower end with bore hole Ø 10,2mm.

• UF8: Mounting at lower end with bore hole Ø 8,2mm for bracket MK 24-1.

Please inquire for more special versions of G08 , G10 , G13 actuators