Pneumatically operated mounting for installation in domelights etc.

• Opening angle 140°or 165°. For special types please inquire

• Fixed cross beam type for domelights with 800, 1.000, 1.300 and 1.600mm inner width of curb and a hinge size of 65 to 70mm

• Ideally suited for domelights: Inner width = nominal width - 200mm

• Due to cross beam design, only small forces are introduced into the curb and domelight frame

• Space-saving due to flat design

• Ease of assembly by hanging the mounting from above into the curb or frame

• Available in 4 sizes with different pneumatic cylinders Type D (for selection of size, see drawing/table on page 2)

• As cylinder locks automatically in open position, unintentional closing is not possible

• Ventilation mode: At a pressure of up to 6bar, mounting opens to ventilation position (approx. 300mm opening width)

• SHE mode: At a pressure of >10bar, cylinder completes a full stroke, and mounting opens to SHE-postion. Domelight locked in closed position by mechanical hook locking device MHV and adjustable locking boltEVB 3- M12 (see locking elements)

• Upper cross beams including preassembled hook locking device MHV (upper cross beams)

• Standard connection for 6mm pipe

• When ordering, please complete the dimensional sheet, and specify inner width

Accessories:
 

• EVB 3-M12:Adjustable locking bolt
• Upper cross beams(inkl. MHV): see upper cross beams

For special types please inquire