Pneumatically operated mounting for installation in domelights etc.

• Opening angle 91° or 105°

• Opening mounting is factory adjustable to suit any domelight or continuous roof light (from approx. 780mm to 2.500mm inner width of curb or frame / continuous roof light opening)

• Due to cross beam design, only small forces are introduced into the curb and domelight frame

• Space-saving due to flat design

• Ease of assembly by hanging the mounting from above into the curb or frame

• Preassembled and adapted to specific building conditions.

• Available in six sizes with different pneumatic cylinders Type D (for selection of size, see drawing/table on page 2)

• As cylinder locks automatically in open position, unintentional closing is not possible

• Ventilation mode: At a pressure of up to 6bar, mounting opens to ventilation position (approx. 300mm opening width)

• SHE mode: At a pressure of >10bar, cylinder completes a full stroke, and mounting opens to SHE position.

• Domelight locked in closed position by mechanical hook locking device MHV and adjustable locking bolt EVB 3-M12 (see locking elements)

• Upper cross beams including preassembled hook locking device MHV (see upper cross beams)

• Standard connection for 6mm pipe

• When ordering, please complete the dimensional sheet, indicating inner width and hinge dimensions.

Accessories:
 

• EVB 3-M12: Adjustable locking bolt
• Upper cross beams (inkl. MHV): see upper cross beams

For special types please inquire